CONTENT

1. Introduction to Switched Networks

1.1 LAN Design
1.2 The Switched Environment

2. Chapter 2 Basic Switching Concepts and Configuration

2.1 Basic Switch Configuration
2.2 Switch Security: Management and Implementation

3. VLANs

3.1 VLAN Segmentation
3.2 VLAN Implementations
3.3 VLAN Security and Design

4. Routing Concepts

4.1 Functions of a Router
4.2 Connect Devices
4.3 Basic Settings on a Router
4.4 Verify Connectivity of Directly Connected Networks
4.5 Switching Packets Between Networks
4.6 Path Determination
4.7 Analyze the Routing Table
4.8 Directly Connected Routes
4.9 Statically Learned Routes
4.10 Dynamic Routing Protocols

5. Inter-VLAN Routing

5.1 Inter-VLAN Routing Configuration
5.2 Configure Legacy Inter-VLAN Routing
5.3 Configure Router-on-a-Stick Inter-VLAN Routing
5.4 Troubleshoot Inter-VLAN Routing
5.5 Layer 3 Switching

6. Static Routing

6.1 Static Routing
6.2 Configure IPv4 Static Routes
6.3 Configure IPv4 Default Routes
6.4 Configure IPv6 Static Routes
6.5 Configure IPv6 Default Routes
6.6 Review of CIDR and VLSM
6.7 CIDR
6.8 VLSM
6.9 Configure IPv4 Summary Routes
6.10 Configure IPv6 Summary Routes
6.11 Configure Floating Static Routes
6.12 Troubleshoot Static and Default Route Issues

7. Routing Dynamically

7.1 Dynamic Routing Protocol Operation
7.2 Dynamic Versus Static Routing
7.3 Routing Protocol Operating Fundamentals
7.4 Types of Routing Protocols
7.5 Distance Vector Routing Protocol Operation
7.6 Types of Distance Vector Routing Protocols
7.7 RIP and RIPng Routing
7.8 Configuring the RIPng Protocol
7.9 Link-State Dynamic Routing
7.10 Why Use Link-State Routing Protocols
7.11 Parts of an IPv4 Route Entry
7.12 Dynamically Learned IPv4 Routes
7.13 The IPv4 Route Lookup Process
7.14 Analyze an IPv6 Routing Table

8. Single-Area OSPF

8.1 Characteristics of OSPF
8.2 OSPF Messages
8.3 OSPF Operation
8.4 Configuring Single-Area OSPFv2
8.5 Configure Single-Area OSPFv2
8.6 OSPF Cost
8.7 Verify OSPF
8.8 OSPFv2 vs. OSPFv3
8.9 Configuring OSPFv3
8.10 Verify OSPFv3

9. Access Control Lists

9.1 IP ACL Operation
9.2 Standard Versus Extended IPv4 ACLS
9.3 Wildcard Masks in ACLs
9.4 Guidelines for ACL Creation
9.5 Guidelines for ACL Placement
9.6 Standard IPv4 ACLs
9.7 Modify IPv4 ACLs
9.8 Securing VTY Ports with a Standard IPv4 ACL
9.9 Structure of an Extended IPv4 ACL
9.10 Troubleshoot ACLs
9.11 Common ACL Errors
9.12 IPv6 ACLs

10. DHCP

10.1 Dynamic Host Configuration Protocol v4
10.2 Configuring a Basic DHCPv4 Server
10.3 Configure DHCPv4 Client
10.4 Troubleshoot DHCPv4
10.5 Dynamic Host Configuration Protocol v6
10.6 Stateless DHCPv6
10.7 Stateful DHCPv6 Server
10.8 Troubleshoot DHCPv6

11. Network Address Translation for IPv4

11.1 NAT Operation
11.2 Configuring NAT
11.3 Troubleshooting NAT

LEAVE A REPLY

Please enter your comment!
Please enter your name here